Question about gaining enable access

[dpetrucci1029]

I recently upgraded the code on one of our

6500 switches. Ever since the upgrade, I can log into the switch with no problem. However, when I go to enable mode, it prompts me once again for the username before the enable password. Not sure if anyone ever saw this. It would be nice to only have to enter my username once instead of again when I go to enable mode. Thx!

Switch>en

User Access Verification

Username:

[Ganesh Hariharan]

I recently upgraded the code on one of our
6500
switches. Ever since the upgrade, I can log into the switch with no
problem. However, when I go to enable mode, it prompts me once again
for the username before the enable password. Not sure if anyone ever
saw this. It would be nice to only have to enter my username once
instead of again when I go to enable mode. Thx!
Switch>en
User Access Verification
Username:

Hi,

Can you share the configuration related to aaa configuration in your switch.

Ganesh.H

[dpetrucci1029]

Hello,

Here are the statements from my switch:

aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication login admin line
aaa authentication enable default group tacacs+ enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local
aaa authorization network default local
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+

Thanks,

Dan P.