06-25-2002 12:12 AM - edited 03-01-2019 10:33 PM
Hi,
I am using NMS 4th Edition. We have cat 6513. When I am chacking these Cat6513, it's show's all modules fine, only for WS-X6381-IDS module, it's show's that "UNSUPPORTD CARD".
The version and modules detail is as follow:
CC-CORE-6513#sh ver
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(11b)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 09-May-02 06:06 by hqluong
Image text-base: 0x40008980, data-base: 0x4181A000
ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-JSV-M), Version 12.1(11b)E3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
CC-CORE-6513 uptime is 1 week, 2 days, 1 hour, 15 minutes
System returned to ROM by power-on (SP by power-on)
System image file is "bootflash:c6sup22-jsv-mz.121-11b.E3"
cisco Catalyst 6000 (R7000) processor with 227328K/34816K bytes of memory.
Processor board ID SAL06110ZNZ
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
38 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
CC-CORE-6513# sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2 SAL061112RL
2 2 Catalyst 6000 supervisor 2 (Standby) WS-X6K-S2U-MSFC2 SAL061112QP
3 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAL0606HSV4
6 2 Intrusion Detection System WS-X6381-IDS SAD061204VA
7 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAD0603051X
9 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL061218PE
10 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL061420DA
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0006.d65a.9e54 to 0006.d65a.9e55 3.5 6.1(3) 7.2(0.35) Ok
2 0005.7485.9124 to 0005.7485.9125 3.5 6.1(3) 7.2(0.35) Ok
3 0008.207e.3dd4 to 0008.207e.3e03 6.0 5.4(2) 7.2(0.35) Ok
6 0002.fce1.3a3c to 0002.fce1.3a3d 1.2 4B4LZ0XA 2.5(1) Ok
7 0001.0002.0003 to 0001.0002.0003 1.1 6.1(3) 7.2(0.35) Ok
9 0009.11e0.4750 to 0009.11e0.475f 1.3 12.1(5r) 12.1(11b) Ok
10 0009.11e0.4574 to 0009.11e0.4583 1.3 12.1(5r) 12.1(11b) Ok
Mod Sub-Module Model Serial Hw Status
--- --------------------------- --------------- --------------- ------- -------
1 Policy Feature Card 2 WS-F6K-PFC2 SAL06111224 3.2 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL06110ZNZ 2.2 Ok
2 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL06110ZS1 2.2 Ok
9 Distributed Forwarding Card WS-F6K-DFC SAL06162PTS 2.2 Ok
10 Distributed Forwarding Card WS-F6K-DFC SAL06162PUX 2.2 Ok
Please help me..
06-25-2002 04:05 AM
I beleive you can download updates to CiscoView for additional device support from
http://www.cisco.com/cgi-bin/Software/CiscoView/cvplanner.cgi
Hope it helps
06-25-2002 08:57 AM
You did not mention as to what is the CV device package version installed for this Cat6513 running NativeIOS?. Is it the latest v5.0?. According to the README file for the device pacage:
UNSUPPORTED CARDS IN THIS RELEASE
+ WS-X6K-S2U-MSFC2
+ WS-X6380-NAM
+ WS-X6381-IDS <-----!!!!!!
I believe that the next version of the package will have the support for this module.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide