RME insists different devices are alias

[amdocs1]

I use RME 3.5.

I add manually devices by name.

For example, rtr-rgw1, rtr-rgw2, rtr-rgw3

RME insists these are all aliases to the same device.

All IP addresses are off course different on these devices and no HSRP, so they don't even share a virtual IP. The names are defined in /etc/hosts, each with one of each router's Eth interface IP ( the server is Solaris ).

[rmushtaq]

See if the workaround listed in: http://www.cisco.com/en/US/products/sw/cscowork/ps2073/products_tech_note09186a008019ce49.shtml helps

[amdocs1]

Great! I added the -a flag to DIServer as explained and now each device gets discovered as a unique one.

Many thanks.