02-20-2012 12:17 PM - edited 03-03-2019 06:30 AM
I am curious if there is a design guide regarding Cisco recommended router make/model based on office size (small/medium/large) where the s/m/l relates to number of devices on the office network creating network traffic, i.e. users, servers, printers, voice, wap, etc..... (don't have numbers for these classifications).
I have a site where there they have approx 300 users/devices, with 4507 distribution sw, connecting up to a 2821 router with 4x T1's bundled (multilink 1).
The WAN connection is near 75%-80% utilize during regular business hrs. No qos currently running.
I'm concerned that, first - the 2821 router for this number of devices and bundled T1's is undersized. Second, seeing output drops on the multilink interface - which I understand could be related to wan congestion - plain and simple.
But we have another site, same scenario, but wan utilization is around 55-65% during reg business hrs - minimal qos is applied on the router multilink 1 interface, but output drops occur as well...even though i might see the multilink 5 min in/out around 50% or the ~6Mb bundle.
Looking for any cisco material that states whether the c2821 is ok, or whether Cisco would recommend another make/model for something of this size and traffic requirement.
thanks
Ed
02-20-2012 01:42 PM
The link below will give you an indication of what kind of router you need based on the WAN link.
http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf
Just a warning, the value express is in HALF duplex and without any encryption. Half the value and this will give you full duplex OR with encryption.
Take the full value and factor it by 4 and you'll get full duplex AND full encryption.
02-22-2012 02:27 AM
A 2821 should be fine. An ISR G2 would be better.
Also if you can move away from bundled T1 to Ethernet, that would be a major plus.
02-22-2012 03:47 AM
Hi Paolo,
Can you elaborate more on your comment about moving away from the bundled T1 to Ethernet please. What is the reasoning or benefits going to Ethernet (think I may know, but want to make sure).
Thanks
Ed Nehring
02-26-2012 03:37 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Those that come to my mind include:
PS:
Your 2821 might be okay up to about 20 Mbps (duplex).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide