I have seen in an stacked switch a module wich an inusual RPS state:
info3750b1#sh env stack
SWITCH: 1
FAN is OK
TEMPERATURE is OK
Temperature Value: 34 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 56 Degree Celsius
Red Threshold : 66 Degree Celsius
POWER is OK
RPS is NOT AVAILABLE
SWITCH: 2
FAN is OK
TEMPERATURE is OK
Temperature Value: 33 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 56 Degree Celsius
Red Threshold : 66 Degree Celsius
POWER is OK
RPS is SUPPLYING
SWITCH: 3
FAN is OK
TEMPERATURE is OK
Temperature Value: 32 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 56 Degree Celsius
Red Threshold : 66 Degree Celsius
POWER is OK
RPS is NOT AVAILABLE
SWITCH: 4
FAN is OK
TEMPERATURE is OK
Temperature Value: 32 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 56 Degree Celsius
Red Threshold : 66 Degree Celsius
POWER is OK
RPS is NOT AVAILABLE
Is normal this situation?
Thanks, Juanan.