12-24-2003 09:10 AM - edited 03-02-2019 12:33 PM
I already have migrated my Supervisor1A, from CATOS v5.3(1) to IOS 12.1(8b)E15. I have the following questions:
1.After to upgrade the first SP, the running configuration shows these 3 commans lines:
!
boot system flash slot0:c6sup11-dsv-mz.121-8b.E15
boot system sup-bootflash:c6sup11-dsv-mz.121-8b.E15
boot bootldr bootflash:c6msfc-boot-mz.121-8b.E15
!
In addition, this other information:
C6509-MEM#remote command switch show bootvar
C6509-MEM-sp#
BOOT variable = slot0:c6sup11-dsv-mz.121-8b.E15,1;bootflash:c6sup11-dsv-mz.121-8b.E15,12
CONFIG_FILE variable =
BOOTLDR variable does not exist
Configuration register is 0x2102
Secondary is up.
Secondary BOOT variable = slot0:c6sup11-dsv-mz.121-8b.E15,1;bootflash:c6sup11-dsv-mz.121-8b.E15,12
Secondary CONFIG_FILE variable =
Secondary BOOTLDR variable does not exist
Secondary Configuration register is 0x2102
This is correct? or only must be show some them?
thank you for response.
12-24-2003 09:47 AM
Best practice would be to boot from sup-bootflash: rather than slot0: The correct command is
boot system flash sup-bootflash:c6sup11-dsv-mz.121-8b.E15
12-26-2003 06:36 AM
Thanks foe tour response.
What about this command?
boot bootldr bootflash:c6msfc-boot-mz.121-8b.E15
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide