02-17-2006 02:28 AM - edited 03-03-2019 01:52 AM
Hi,
The problem is that not all syslog messages come to my configured syslog server.
The problem is on Catalyst 4003 CatOS 4.5.
I set :
Severity level 6
Facility local7
set the ip address of my syslog server, and enabled the logging server.
Now, the messages with a severity level lower than 6 (informational) do not get to syslog server, neither come messages with severity level of 6 (that is very starnge).
When I set the severity level of 5, -the messages with sevrity 5, do get to syslog server, but the messages with lower levels dont come. Why is this hapenning? On my IOS switches and routers everithyng is fine, this happen only on catos.
How can I get ALL my syslog messages to syslog server?
Solved! Go to Solution.
02-17-2006 03:04 AM
Hi Friend,
Good to know it worked. Yes the message with lower levels (less than 6) will also be sent to the syslog server as it is sent in IOS.
HTH. if yes please rate the post.
Ankur
02-17-2006 02:37 AM
Hi Friend,
Can we try few command out here
set logging level all 6 default
It should work. Can you please try this and update if it works
HTH
Ankur
02-17-2006 02:37 AM
Hi Friend,
Can we try one command out here
set logging level all 6 default
It should work. Can you please try this and update if it works
HTH
Ankur
02-17-2006 02:58 AM
Yes. It did work, at least a message with level sevrity 6 came to syslog server. Does it mean that messages with lower levels will come to syslog server, like in IOS? Waiting for reply...
02-17-2006 03:04 AM
Hi Friend,
Good to know it worked. Yes the message with lower levels (less than 6) will also be sent to the syslog server as it is sent in IOS.
HTH. if yes please rate the post.
Ankur
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide