cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
344
Views
0
Helpful
1
Replies

two domain setup part 2

wbg5
Level 1
Level 1

Ok, this is what I have, what is the best way to connect it all of them together?

I have one router 7500 and 2 core Cat 6500 switches; I need two networks one .com the other .net. I do not want the traffic from the net side to interface with the com side. I know ACLs on the router will handle that part, but what I need is the best way to setup the system.

1 Reply 1

ccie5851
Level 1
Level 1

It really depends on a number of variables. How many and what type of interfaces do you have on the 7500? What about your 6500s? How do these devices (7500 and 6500s)connect to the rest of your network? How large is the rest of your network? I think it would be difficult to generalize for you how to connect this gear together without understanding what you have and what you want to do.

I would be easy to say connect all of the .com gear to one of the 6500s and all of the .net gear to the other. Connect both switches to difference interfaces on the 7500 and create your ACLs there to prevent network to network communication. It is rarely that easy in the real world, though.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: