Hi allI'm facing a problem while trying to install Cisco LMS1.0 on a brand new COMPAQ/P4 machine.The First setup CD itself fails with a error msgsaying "Cannot create the Install Dependency file"and the Installation program aborts. It alsopops up Dr....
Where can I find documentation, how to configure2 Fast Ethernet Port Adapters ( 100BaseFX, duplex SC)Since, I want to configure one Adapter for Vlan1 and2nd Adapter for Vlan2.Switch is Catalyst 2900 XLM
I have a router in a remote city that has a Frame Relay connection to the entire corporate network. The remote city is adding another circuit that connects to a frame network of a partner company. The remote users have to access both systems, but tra...
I have one set of vlans terminated on a 7204 router. I have another set of vlans terminating on on a 6509 MFSC. At each site I have an AS400, and both of these machines need to be on the same subnet for diaster recovery purposes, but in different p...
If I want to give priority to a server thats connected to one of the port on a Catalyst 2900 switch, should the configuration be done on the router or on the switch? Please assist me how it should be done. Thankyou
I want to add another router Cisco7206 to accommodate some dedicated routers outside the firewall. I am going to use a hub to connect both external router and the Cisco7206. I am wondering whether I can have multiple ROUTE statement in the PIX config...
We have an office connected to a frame relay connection and a Nuera machine and now we want to move that machine to a new location but we can't move the fram relay connection. We have an ethernet connection between this two locations and two Cisco ro...
I am troubleshouting two router 7206-vxr connected throught an ATM cloud with switch Marconi.Router A -- switch marconi A -- ATM Cloud -- switch marconi B -- Router B a Router C(frame-relay with v35) is connected throught a frame-relay cloud to S...
How can I prevent Cisco devices, mainly 3500's, from logging linkup/linkdown messages? I have changing logging buffered from debugging to errors but still we get linkup/linkdown messages. This is annoying on edge devices because we have lots of PCs r...
hi,our is a ISP setup, and our netwrok centrally controlled. for logging into router we have username and password , which are Ist auth. from TACACS server and then we r permkitted to log into he router, so every time u have to enter user name and pa...
Router running @ 65%...with Process - IP Input running at 25%...this may be normal operation of the router...any other commands other than "show proc cpu" to determine if router is having memory/cpu problems?
