05-22-2003 10:23 AM - edited 03-02-2019 07:34 AM
Have a device that was added. Can do SNMP pulls and the OID that comes back is:
system.sysObjectID.0 : OBJECT IDENTIFIER:
.iso.org.dod.internet.private.enterprises.cisco.ciscoProducts.502
(Interpreted, this OID is: 1.3.6.1.4.1.9.1.502)
I tried the OID translator on cisco.com and it does not have a 502.
The system description was:
system.sysDescr.0 : DISPLAY STRING- (ascii): Cisco Internetwork Operating
System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(14)E1,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Anybody run into this?
05-22-2003 10:45 AM
Using: http://jaguar.ir.miami.edu/cgi-bin/snmptransc.cgi, the above OID translates to cat4506 which is supported in the latest IDU:
You can download the latest IDU v4-0 from: http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme and install.
05-22-2003 11:41 AM
I did get a "sh tech" from the system and it shows that it is a Cat4506 - I did find that support for it was included in IDU 2.0.
Thanks for the responses.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide