Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have been trying to find some recommendation for generation of Minor, Major and Critical alarms based on CRC errors on a serial port -- locIfInCRC. Does anyone have some info regarding this? Thanks.
Have a Cisco2821 with a vwic2-1mft-e1 card. Trying to setup for data calls. Just recently upgraded the IOS to (C2800NM-ENTSERVICES-M), Version 12.4(15)T3 -- previous version was (C2800NM-ENTBASE-M), Version 12.4(15)T3. Trying to test data calls...
Specifically, I can get into a voice ?hairpinning? or loop issue between the as5350 and pbx when certain digits are passed to the as5350?passed to the pbx and back to the as5350 (until all the DS0 channels are used up!). So, I?d either like to figu...
Getting a lot of bypassed requests. Nearly 30 percent of requests. Most show up as "Packets bypassed, no pending connection: " Can someone provide a little more detail what is meant by this.Thanks.
The quick start guides show LMS 2.5 with a minimum requirement of the server of 80 Gig of free disk space. The LMS 2.5.1 guide shows a disk requirements of only 10 Gig or more free space. Can someone explain this difference? links for reference: Quic...
Thanks for the reply. The customer had upgraded to the EntServices from the EntBase. Under the EntBase he was able to enter the pri-group but the data calls were failing. eb 28 11:21:49.737: ISDN Se0/1/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=5...
I did get a "sh tech" from the system and it shows that it is a Cat4506 - I did find that support for it was included in IDU 2.0. Thanks for the responses.
I just had this issue with a customer. Problem was corrected by changing the KeepAlive value on the Server in the httpd.conf file.Here is the BUG info.Problem:========It has been seen that Ciscoworks when installed on certain hardware, has a veryslo...
