07-21-2006 07:49 AM - edited 03-03-2019 04:10 AM
Hi,
Is there any lmitiation for install WS-X4418-GB on WS-C4006 Switch? How many can be installed?
Thanks.
07-21-2006 08:22 AM
No limitation be aware of the following:
The WS-X4418-GB Gigabit Ethernet switching module offers two dedicated 1000BASE-X (GBIC) ports (ports 1 and 2) and 16 oversubscribed (possibly blocking) 1000BASE-X (GBIC) Gigabit Ethernet ports. The module provides a Gigabit Ethernet network backbone connection for multiple servers and high-end workstations.
Ports 1 and 2 each have 1-Gbps dedicated bandwidth. These ports are typically used to connect to the network backbone.
The 16 oversubscribed ports (ports 3 through 18) are multiplexed in four groups of four ports each:
*Ports 3, 5, 7, 9
*Ports 4, 6, 8, 10
*Ports 11, 13, 15, 17
*Ports 12, 14, 16, 18
Lines on the front panel of the WS-X4418-GB are used to frame the port groups.
Each group of four ports shares 1-Gbps of bandwidth.
The oversubscribed Gigabit ports are typically used to connect to clients or servers equipped with Gigabit Ethernet network interface cards (NICs).
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/hw_doc/mod_inst/03instal.htm#wp1037570
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/hw_doc/install/01intro.htm#wp1015201
Please rate helpful posts.
07-21-2006 08:24 AM
Hi,
Out of 6 slots, first slot is always for supervisor engine. So u can as max of 5 slots and also it can't installed in first slots. It is limitation for any line cards u install in 4506.
i don't find any other limitation for installing WS-X4418-GB on 4006.
Rate if it does,
Rgs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide