Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to allow client to access wireless lan based on the client mac-address. How I config it on WLC 2006 locally (not using radius server)? If yes, How mnay mac-address can be configured on the wlc2006?Thanks.Douglas
What is the RTO value on show ip eigrp neighbor?I have two wan link with same bandwidth. The RTO value for one link is 10 times higher than the other. Is it abnormal?Thanks.
Hi all, AP model is 1131 ver 12.3(11)JX1 WLC model is 2006 ver 4.0.179.8 Router as a dhcp server ip dhcp pool DHCP_Pool network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 option 43 ascii "192.168.2.10" The ap can obtain ip address and can p...
Hi all,AP model is 1131 ver 12.3(11)JX1WLC model is 2006 ver 4.0.179.8Router as a dhcp serverip dhcp pool DHCP_Pool network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 option 43 ascii "192.168.2.10"The ap can obtain ip address and can ...
Hi,The remote site is using Huawei Router. On remote router, it show that the isdn call is received but terminated at layer 3.When the remote site change to Cisco Router, the ISDN connection is successful.But the Huawei Router can connect to other Ci...
No, the other end is another company which does not allow dial out.Below is the debug isdn event and debug isdn q931:ISDN BR0 Q931: RX <- SETUP_ACK pd = 8 callref = 0xB4 Channel ID i = 0x89ISDN BR0 EVENT: process_rxstate: ces/callid 1/0x8034...
My network is as below:3548 (Vlan 1-40) <-> CE500 (1,41-50) <-> 4006 (Vlan 1-100)Should I need to add the vlan 1-40 on CE500 so traffic for VLAN 1-40 can flow from 3548 to 4006.Thanks.
