WS-X6148-RJ-45 + WS-F6K-PWR

[fopravil]

Our customer has a Cat6509 switch with one faulty WS-X6148-RJ-45 module. The "show module" commands shows there is an sub module WS-F6K-PWR on it. Can I order a replacement module to WS-X6148-RJ-45 together with PoE sub-module (for ex. WS-X6148-RJ45V) in order I could avoid removing and installing the WS-F6K-PWR from and to the WS-X6148-RJ-45 during its replacement at customer premises?

[spremkumar]

hi

As per the datasheet aval both the card are similar except u have the upgrade option in the WS-X6148-RJ-45 module to the PoE DFC.

But the later module comes up with a PoE DFC inbuilt..

WS-X6148-RJ-45 : Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module; upgradable to support Cisco Prestandard PoE Daughter Card (part number WS-F6K-VPWR=) or to IEEE 802.3af PoE daughter card (part number WS-X6148-45AF-UG=)

WS-X6148-RJ45V : Cisco Catalyst 6500 Series 48-Port 10/100 RJ-45 Classic Interface Module with Cisco Prestandard PoE Daughter Card (that is, includes daughter card [part number WS-F6K-VPWR=])

do refer this link for more info..

http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet0900aecd8017376e.html

regds