WS-X6K-SUP2-2GE can be upgraded ??

[abhishek.chanana]

Hi ,

Could any tell me WS-X6K-SUP2-2GE can be upgraded from 128 MB DRAM to 512MB DRAM ?

regards

Abhishek

[devang_etcom]

hi abhishek...

i think you can upgrade the DRAM from 128 to 256MB...

look at this link it will give you the guidence:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12693.pdf

http://www.digitalsurplus.com/6000.htm

rate this post if it helps

regards

Devangs

[jolmo]

Devangs is right. You can upgrade the DRAM from 128 to 256MB.

But you can also upgrade MSFC2 DRAM to 512MB:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_6953.htm

HTH

[abhishek.chanana]

Hi Devang ,

Thanks for the reply. Its a upgradation plan from 128 to 256 as such nothing abt 512 MB RAM.

regards

Abhishek

[devang_etcom]

abhishek look at this may be it help you:http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801c0eb0.shtml

here at the end you will find install and upgread link...

rate this post if it hleps

regards

Devang

[abhishek.chanana]

thanks for ur concern, but still answer is not that satisfactory.

regards

Abhishek

[Bobby Thekkekandam · Accepted solution]

Hi Abhishek,

Here's another URL that should be helpful:

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00801a5d58.shtml

The part numbers are MEM-S2-512MB= and MEM-MSFC2-512MB=

HTH,

Bobby

*Please rate helpful posts.

[abhishek.chanana]

Thanks , thats what i was looking for .

regards

Abhishek

:)