06-22-2021 12:32 AM
Hello everybody
I'm planning to upgrade my ASR-903 Dual RP Routers.
The update is from 15.6 (2) SP2 to 17.3 (3) SPA.
Do you think I have to install 16 first?
This is the show version and the show platform.
XXXXXXXX#sh ver Cisco IOS XE Software, Version 03.18.02.SP.156-2.SP2-ext Cisco IOS Software, ASR900 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.6(2)SP2, RELEASE SOFTWARE (fc2)
XXXXXXXXX#sh platform Chassis type: ASR-903 Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0/1 A900-IMA8S1Z ok 5w0d 0/3 A900-IMA8S1Z ok 5w0d 0/4 A900-IMA8Z ok 5w0d 0/5 A900-IMA8Z ok 5w0d R0 A900-RSP3C-400-S ok, active 5w0d R1 A900-RSP3C-400-S ok, standby 5w0d F0 ok, active 5w0d F1 ok, standby 5w0d P0 A900-PWR1200-A ok 5w0d P1 A900-PWR1200-A ok 5w0d P2 A903-FAN ok 5w0d Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- R0 16040627 15.6(20r)S R1 16040627 15.6(20r)S F0 16040627 15.6(20r)S F1 16040627 15.6(20r)S
Should I also update the ROMMON?
Thank you
06-22-2021 01:08 AM
ROMMON upgrade will be mandatory.
Direct upgrade to 16.X.X or 17.X.X is possible if ROMMON has been upgraded.
06-22-2021 01:25 AM
Thanks Leo for the reply.
I would like to ask two questions:
Thanks again.
06-22-2021 01:59 AM
M.
06-22-2021 02:09 AM
@vin.marco wrote:
To upgrade to version 17.3 (3)SPA, which ROMMON version should I install?
Whatever is the latest that is supported by the RSP.
@vin.marco wrote:
- From the show version, installed IOS is 15.6 or 3.18
Old "name" is 15.6 and the new "name" is 3.18.X.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide