Hi ,
I am running IOS XE 17.3.1a on CML2 lab. While working with SR-TE PCE based policy or local policy the policy is coming up ; however i dont have option to use "autoroute". Is this sw has any limitation.
Manual Policy Creation doesnt have option for this autoroute.. also for PCE initiated policy, should i need any further configuration.
SR TE Policy output
Name: *3.3.3.3|53 (Color: 53 End-point: 3.3.3.3)
Owners : BGP
Status:
Admin: up, Operational: up for 00:11:10 (since 06-23 16:37:53.654)
Candidate-paths:
Preference 100 (BGP):
Dynamic (pce 15.15.15.15) (active)
Metric Type: IGP, Path Accumulated Metric: 3
16003 [Prefix-SID, 3.3.3.3]
Attributes:
Binding SID: 22
Allocation mode: dynamic
State: Programmed
IPv6 caps enabled
Name: SR_TE (Color: 5 End-point: 3.3.3.3)
Owners : CLI
Status:
Admin: up, Operational: up for 01:05:55 (since 06-23 15:43:08.893)
Candidate-paths:
Preference 5 (CLI):
Dynamic (pce 15.15.15.15) (active)
Metric Type: IGP, Path Accumulated Metric: 3
16003 [Prefix-SID, 3.3.3.3]
Attributes:
Binding SID: 17
Allocation mode: dynamic
State: Programmed
My configuration:
segment-routing mpls
!
connected-prefix-sid-map
address-family ipv4
5.5.5.5/32 index 5 range 1
exit-address-family
!
segment-routing traffic-eng
policy SR_TE
color 5 end-point 3.3.3.3
candidate-paths
preference 5
constraints
segments
dataplane mpls
!
!
dynamic
pcep
metric
type igp
!
!
!
!
on-demand color 53
authorize
candidate-paths
preference 100
constraints
segments
dataplane mpls
!
!
dynamic
pcep
metric
type igp
!
!
!
!
pcc
pce address 15.15.15.15 source-address 5.5.5.5 preference 10
report-all
Thanks
Mohideen.
