Autosteering through ODN feature | IOS XE | L2VPN evpn

[Mohideen Pitchai]

Hi,

Greetings.. ODN feature to create SR-PCE based tunnel creation is not happening on PCC for L2VPN EVPN based BGP extcommunity. Where the same is working through VPNv4 address family. Appreciate further support.

My IOS XE Version on CML2  17.3.1a,

IOS XE Configuration:

R3#sh pce client peer PCC's peer database: -------------------- Peer address: 15.15.15.15, Precedence: 255 Client POLICY_MGR State up Capabilities: Stateful, Update, Segment-Routing

segment-routing traffic-eng on-demand color 513 authorize candidate-paths preference 513 constraints segments dataplane mpls ! ! dynamic pcep metric type igp

BGP routing table entry for [1][1:200][00000000000000000000][205]/23, version 35 Paths: (1 available, best #1, table evi_200) Not advertised to any peer Refresh Epoch 2 Local 5.5.5.5 (metric 4) (via default) from 2.2.2.2 (2.2.2.2) Origin incomplete, metric 0, localpref 100, valid, internal, best Rcvd Label: 16, Local Label: None Extended Community: RT:1:200 Color:513 Originator: 5.5.5.5, Cluster list: 2.2.2.2 rx pathid: 0, tx pathid: 0x0 Updated on Jun 23 2021 09:23:44 UTC R3#

Thanks

mohideen.

[Harold Ritter · Accepted solution]

Hi Mohideen,

SR EVPN is not yet supported in IOS-XE.

Regards,

[Mohideen Pitchai]

Dear Harold,

Thanks once again for prompt support.

Best REgards

Mohideen.

[Harold Ritter]

I am glad I could help. You are very welcome Mohideen.