cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
466
Views
0
Helpful
3
Replies
Mohideen Pitchai
Beginner

Autoroute announce for SR-TE Policy | IOS XE

Hi , 
I am running IOS XE 17.3.1a on CML2 lab. While working with SR-TE PCE based policy or local policy the policy is coming up ; however i dont have option to use "autoroute". Is this sw has any limitation.

 

Manual Policy Creation doesnt have option for this autoroute.. also for PCE initiated policy, should i need any further configuration.

 

SR TE Policy output

 


Name: *3.3.3.3|53 (Color: 53 End-point: 3.3.3.3)
Owners : BGP
Status:
Admin: up, Operational: up for 00:11:10 (since 06-23 16:37:53.654)
Candidate-paths:
Preference 100 (BGP):
Dynamic (pce 15.15.15.15) (active)
Metric Type: IGP, Path Accumulated Metric: 3
16003 [Prefix-SID, 3.3.3.3]
Attributes:
Binding SID: 22
Allocation mode: dynamic
State: Programmed
IPv6 caps enabled

 

Name: SR_TE (Color: 5 End-point: 3.3.3.3)
Owners : CLI
Status:
Admin: up, Operational: up for 01:05:55 (since 06-23 15:43:08.893)
Candidate-paths:
Preference 5 (CLI):
Dynamic (pce 15.15.15.15) (active)
Metric Type: IGP, Path Accumulated Metric: 3
16003 [Prefix-SID, 3.3.3.3]
Attributes:
Binding SID: 17
Allocation mode: dynamic
State: Programmed

 

My configuration:

 

segment-routing mpls
!
connected-prefix-sid-map
address-family ipv4
5.5.5.5/32 index 5 range 1
exit-address-family
!
segment-routing traffic-eng
policy SR_TE
color 5 end-point 3.3.3.3
candidate-paths
preference 5
constraints
segments
dataplane mpls
!
!
dynamic
pcep
metric
type igp
!
!
!
!
on-demand color 53
authorize
candidate-paths
preference 100
constraints
segments
dataplane mpls
!
!
dynamic
pcep
metric
type igp
!
!
!
!
pcc
pce address 15.15.15.15 source-address 5.5.5.5 preference 10
report-all

 

Thanks

Mohideen.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Harold Ritter
Cisco Employee

Hi Mohideen,

 

The autoroute feature is not yet supported. In the meantime, you could use a static route or ODN to steer the traffic in the SR Policy.

 

Regards, 

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

I am glad I could help. You are very welcome Mohideen.

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

3 REPLIES 3
Harold Ritter
Cisco Employee

Hi Mohideen,

 

The autoroute feature is not yet supported. In the meantime, you could use a static route or ODN to steer the traffic in the SR Policy.

 

Regards, 

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post

Mohideen Pitchai
Beginner

Dear Harold,

 

Thanks once again for prompt response.. 

 

Best REgards

Mohideen.

I am glad I could help. You are very welcome Mohideen.

Harold Ritter
Sr Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México

View solution in original post