Resolved! BFD support with 12000 Engine 4+ POS
Hi,Someone can me confirm if BFD is sopported by Engine 4+?? I saw that it's supported on Engine 3 but I don't saw if it is supported on Engine 4+
Hi,Someone can me confirm if BFD is sopported by Engine 4+?? I saw that it's supported on Engine 3 but I don't saw if it is supported on Engine 4+
Hello,What is the IP SLA operation that is used to measure the Packet Loss Ratio? and how is it configured to be triggered if packet loss exceeded 5 % ? thx
Looking for specs on the A9K-4T16GE-SE card. Is this a Typhoon or Trident card?The sites all reference 40 or 56 Gig card. Which is it?Also looking for a logical view of the card as far as oversubscription.RIB/FIB?Plan to have 2 RSPs feeding the unit...
Device Platform: C7609-S (RSP720-3CXL)IOS: 15.1(2)S I have some question as a below EEM script working behavior[Topology]as a attachment file[EEM Script]track 1 interface TenGigabitEthernet7/1 line-protocoltrack 2 interface TenGigabitEthernet7/2 line...
Good day to you all,I have a cisco 7604 router, and it stuck in Rommon mode, I cannot go with the TFTP server to upload the IOS image, so the other solution is to use xmodem, however, I could not success in that and I do not know any other solution ...
Remember when voice was the original mobile network use-case? It was a much simpler time, with more network control, greater profit, and fewer competitors. Fast forward to today and like the rest of the Service Provider industry, mobile voice communi...
Hi All,I have performed a "monitor np counter RSV_DROP_IPM4_ING_RTE_DFLAG_DROP np4 count 1 location 0/1/CPU0 detail" on an ASR 9K in an attempt to identify some multicast packets that are dropped.The capture shows three sections with hex values, whic...
I have an ASR920 that does not boot because the bootflash seems to be broken. I tried to boot from USB but since the bootflash seems to be checked during the boot sequence I cannot boot nor do I see a possibility to format the bootflash. Does anybody...
can any one help me regarding this ospf topology Question is i want to achieve route for 3.3.3.3/32 via R1 , even from R2 router, but currently R1 is receiving via R1-R3 and R2 is receiving via R2-R3
by Sanjeev Mervana, Product & Solutions MarketingSecurity has become a service provider imperative. Cyber adversaries are more aggressive than ever in attacking services, devices and customer data. At Cisco, we believe that a modular, open and multi-...
Hi!Yesterday we are configured SCE-8000 to VAS mirror to exclude torrenttraffic from this mirror as it described athttp://www.cisco.com/c/en/us/td/docs/cable/serv_exch/serv_control/broadband_app/rel41x/vas_sol/vas_sol/03_vas_sol_confi...
I want to apply ASR1004 act as LNS to support 20K PPP session, the following configuration can support it(I suppose 20K session's traffic is 20G.): Part NumberProduct DescriptionQuantityASR1004Cisco ASR1004 Chassis, Dual P/S1ASR1004-PWR-ACCisco ASR1...
were trying to use SNMP to change the channel OID, When he try to change the channel number through the SaPeControlChNum(1.3.6.1.4.1.1429.2.2.6.5.2.1.1.2.1)It doesn't change any of the PID info or Channel Status (channel # channel name, etc)It only c...
Hi Guys, I have two Cisco ASR's connected together by two resilient links.On each ASR is a switch with vlans on them. Id like to extend these vlans between the ASR'sIE:(Vlans 1,2,3,4 ) Switch > .1qTrunk> ------- ASR1 =========== ASR2 -< .1qTrunk <---...
I want to provide access to third parties to verify my certifications . I can access my Cisco. com .Id but i do not know how i will share my CCNA certifcate access for verification to third party .or share my credential report to employer email ad...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-04-2024 01:58 PM | ||
04-18-2024 09:25 AM | ||
03-08-2024 05:00 PM | ||
02-12-2024 03:38 PM | ||
01-18-2024 11:31 AM |