Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a single Cisco Callmanager 4.0(1)Sr2. When I register this into my corporate Windows2000 domain and I restart the server, all Callmanager's services doesn't start due to a logon failure. I tried to reset passwords of the local users and al...
Hi,I have a question about DMVPN. I must implement an environment with a hub and <n> spokes. All spokes are connected to hub with leased lines thus on the hub I have <n> serial ports. Can I implement DMVPN with this kind of configuration?I tried a te...
I have a LAN with 3 vlans on a catalyst 6509 routed by MSFC. On vlan 1 I have a DHCP server and on other 2 vlans (192, 194) clients. I configured "ip helper-address" command with dhcp's IP address. If I put a client on vlan 194 I get right IP address...
Hi, we have 2 ACS 3.2 that authenticates HTTP Users.These ACS refers to windows NT directory for authentication and we have defined some groups that authorizes users in these groups for HTTP, HTTPS etc.Periodically but randomly these 2 ACS hangs and...
Hi, here's the config:interface Vlan192 ip address 10.155.192.191 255.255.254.0 ip helper-address 10.155.201.21 no ip redirects standby 192 priority 210 preempt standby 192 ip 10.155.192.2!interface Vlan194 ip address 10.155.194.191 255.255.254.0 ip ...
Hi, all the subnets are /23 (255.255.254.0)It seems that all scopes are defined OK because I can get right IP addresses from vlan 194 and if I delete lease entry also from 192.I send to you the Interface vlan configs as soon as possible.Thank you.
Hi, thanx for your post.I resolved this issue, I opened a support case to movian that has sent to me documentation for configuring PIX. But my problem was that the movian client must be installed on main memory of the iPaq and not to compact flash.If...
