cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

275
Views
1
Helpful
1
Replies
Beginner

BFD support with 12000 Engine 4+ POS

Hi,

Someone can me confirm if BFD is sopported by Engine 4+?? I saw that it's supported on Engine 3 but I don't saw if it is supported on Engine 4+

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Per below document, it is

Per below document, it is supported

 

http://www.cisco.com/en/US/technologies/tk648/tk365/tk381/technologies_white_paper0900aecd80243ff4_ps6599_Products_White_Paper.html

 

"For the Cisco 12000 Series Internet Router, the target release for BFD is Release 12.0(31)S. It will provide BFD support for the OSPF, ISIS and BGP protocols. Because BFD will run in distributed mode on the Cisco 12000 Series, it is important to verify that the appropriate line card is also supported. Release 12.0(31)S targets all OC3/OC12/OC48 Engine 3 Packet Over SONET line cards, as well as all Engine 3 Ethernet Cards and Engine 4+ Ethernet Cards."

 

-Nagendra

1 REPLY 1
Highlighted
Cisco Employee

Per below document, it is

Per below document, it is supported

 

http://www.cisco.com/en/US/technologies/tk648/tk365/tk381/technologies_white_paper0900aecd80243ff4_ps6599_Products_White_Paper.html

 

"For the Cisco 12000 Series Internet Router, the target release for BFD is Release 12.0(31)S. It will provide BFD support for the OSPF, ISIS and BGP protocols. Because BFD will run in distributed mode on the Cisco 12000 Series, it is important to verify that the appropriate line card is also supported. Release 12.0(31)S targets all OC3/OC12/OC48 Engine 3 Packet Over SONET line cards, as well as all Engine 3 Ethernet Cards and Engine 4+ Ethernet Cards."

 

-Nagendra

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards
This widget could not be displayed.