Good Afternoon,
I have an ASR1002-X router running the following IOS-XE software:
ASR1K#sh ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.2(4)S5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Tue 25-Feb-14 11:36 by mcpre
IOS XE Version: 03.07.05.S
Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
D-RDSL-LNS uptime is 3 weeks, 6 days, 23 hours, 13 minutes
Uptime for this control processor is 3 weeks, 6 days, 23 hours, 15 minutes
System returned to ROM by reload
System restarted at 14:31:46 UTC Mon Dec 8 2014
System image file is "bootflash:asr1002x-universalk9.03.07.05.S.152-4.S5.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: advipservices
License Type: Permanent
Next reload license Level: advipservices
cisco ASR1002-X (2RU-X) processor with 6889950K/6147K bytes of memory.
Processor board ID FOX1826H10L
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
6688767K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
ASR1K#
As I intend to use the "Intelligent Services Gateway" (ISG) functionality, I'm just wondering how I can verify if the above IOS-XE image includes the ISG functionalityor not, and perhaps address the following related queries:
1) Is the ISG functionality "bundled" in with the IOS-XE software versions?
2) Which Licence level and type are required for ISG?
2) Most of the available ISG documentation points to IOS-XE release "3S" - how does that correlate to the ASR1K s/ware images and the displayed IOS-XE version:
i.e. "IOS XE Version: 03.07.05.S"
or to the 15.2(4).S5 release?
(BTW - The Software Research tool on CCO is not working)
Any hints or glues would be greatly appreciated...............
Thanking you all in advance.
Kind Regards,
Dronic
