Hi Folks
I need your help. I’m struggling with an N7700 vrf redistribution between eBGP and OSPF.
As you can see in the design, I have two N7700 PE Router which are running with MPLS, ISIS and MP-BGP, that’s working so far.
Now I would like to interconnect both PE router with e.g. OSPF as redundancy. If I redistribute the eBGP learned route in the vrf V-2 on the PE Router 2, I can’t see them on the
On the Node 1 where I would like to see the routes via OSPF, I just have en empty routeing table, but in the database I can see the network as Type-5 :
OSPF Router with ID (10.255.211.173) (Process ID CCN VRF V-14)
Router Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# Checksum Link Count
10.255.211.173 10.255.211.173 118 0x80000041 0xe972 3
10.255.211.177 10.255.211.177 124 0x8000004a 0x3d13 3
Opaque Link Link States (Area 0.0.0.0)
Link ID ADV Router Age Seq# Checksum Opaque ID
3.0.0.0 10.255.211.177 3 0x80000001 0x97cd 0
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
10.14.14.0 10.255.211.177 805 0x80000002 0x8de6 3489725528
10.14.15.0 10.255.211.177 805 0x80000002 0x82f0 3489725528
10.255.127.64 10.255.211.177 805 0x80000002 0x58b7 3489725528
10.255.254.10 10.255.211.177 805 0x80000002 0x7710 3489725528
10.255.254.11 10.255.211.177 805 0x80000002 0x6d19 3489725528
10.255.254.31 10.255.211.177 805 0x80000002 0xa4cd 3489725528
Thanks for your help
