Other Service Provider Subjects

dear support,  i have two ASR1002 with ESP5, and i want to upgrade to ESP10, and purchase new series , which you advise me ASR1006 or ASR1002HX, and if i purchase ASR1006 can i install these items on it: Part Number Product Qty. SPA-1X10GE-L-V2 ...

Hi Folks I need your help. I’m struggling with an N7700 vrf redistribution between eBGP and OSPF. As you can see in the design, I have two N7700 PE Router which are running with MPLS, ISIS and MP-BGP, that’s working so far. Now I would like to inter...

I am looking for following information pertaining to CIMC: Where can I find the upgrade path for CIMC? Where can I find the compatibility of BIOS and firmware version of CIMC? Have to upgrade Cisco UCS C220 and C460 to 3.0(1c) version, please helo me...

Hi, I have an ASR1006 router with 2GB of Memory. IOS: 15.4(3)S3. Following is the snapshot of the memory: Load Average Slot  Status  1-Min  5-Min 15-Min   RP0 Healthy   0.10   0.11   0.11   RP1 Healthy   0.00   0.01   0.00 ESP0 Healthy   0.00   0.00...

I have a WS-C6509-E with a VS-SUP2T-10G if I have a smartnet contract  can I get an IOS upgrade from Cisco to go from ver 12.5 to 15.0 And can you explain the end of service on the WS-C6509-E       

i have cisco ASR1002 with throughput 5Gbps ESP5 , and i want to upgrade it to 10Gbps my question that i can do that with software license or i must purchase ESP10 ?

Hello, I need to upgrade the firmware on a Cisco modem, model number DPC 3010.  I do not have an Internet service provider.  How do I perform the upgrade?

Has anyone configured a pair of ASR920's using multi-chasis LACP for failover?  Did it go ok?  Any catches?

Hi, I configured some policy services for Voice and Video, but I don´t know how to verify if it works correctly, could anyone help me with this doubt please: These are my policies configure on a Fastethernet interface: Service-policy output: Core_Q...

Hi, I'm planning to take my CCIE service provider lab exam in USA. can anyone please tell me what type of visa I need to apply for. Thanks

Good Afternoon  y'all Im having an issue getting vlans to show as up on an ISR 4331 w/a NIM-ES2-8 installed . i have the correct firmware installed .  I have the port i want to use configured as a trunk and allowing the vlans needed.  The switch con...

Hi to all! I reasearch arp-keepalive mechanism in ISG functionality of ASR1k. Link to Cisco.com that describe this functionality- http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/isg/configuration/xe-3s/isg-xe-3s-book/isg-sess-maint-pol.html So, I do...

Hi guys. There is a problem.  We have upgraded ios xe to 3.16.05 S on ASR 1006.  After that when traffic had reached some value(aproximatly 20gbit /s, we use etherchannel), it  has being truncated on the interface. Netflow v9 is default on xe 3.16.05...

hello everyone  I have CMTS cisco uBR7246VXR (UBR7200-NPE-G1) and now it works fine  but the Downstream is 24mbps and upstream 1.4mbps  I have to configure this CMTS that able to test the modem TC4300 Docsis 3.0 for service 120mbps / 20mbps  could yo...