12-15-2010 07:59 AM - edited 03-01-2019 02:23 PM
Dear All,
We experiencing strange behaviour of our SCE8000 platform [SW 3.6.5]. We are trying to use Internal Quota Manager with daily replenished buckets. Quota is giving out normally, but then subscriber reconnect (logout and login) it starts counting from zero. Means that SCE do not store buckets information. Is it OK or we should do smt.? Because according to documentations SCE should keep buckets information for the subscriber thorught the aggregation period.
Thanks,
Denis
12-15-2010 09:32 AM
Hi Denis,
Could you show how you have found that issue? In other words, illustrate the problem with commands outputs.
Thanks,
Tom
12-15-2010 11:10 PM
Hi Tom,
1. Subscriber after login:
S132SCE8000T1#>sh int LineCard 0 subscriber name xxxxx bucket-state id 1
Bucket type: Down Volume
Bucket state: OK
Bucket size: 200000
Bucket usage: 0
2. Subscriber is consuming quota:
S132SCE8000T1#>sh int LineCard 0 subscriber name 9409970149 bucket-state id 1
Bucket type: Down Volume
Bucket state: OK
Bucket size: 200000
Bucket usage: 11
3. Subscriber after reconnect (log out and log in again):
S132SCE8000T1#>sh int LineCard 0 subscriber name xxxxx bucket-state id 1
Bucket type: Down Volume
Bucket state: OK
Bucket size: 200000
Bucket usage: 0
Kind Regards,
Denis
12-20-2010 05:38 AM
Hello Denis,
Actually this is an expected behavior as the subscribers are removed from the SCE internal database at log out.
One thing that would do the trick is to ignore when the subscriber disconnects; like, in the case of RADIUS LEG, to ignore the accounting-stop message.
Regards,
Fabian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide