cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
453
Views
0
Helpful
0
Replies

Set CoS to inner VLAN

david.sua
Level 1
Level 1

Hi all!

 

I am looking for a way to set a value of CoS to a inner VLAN when I use staked VLANs.

I try to use policy-map but only can mark CoS in outer VLAN.

My config,

7206VXR (NPE-G2) 12.4(15)T16

class-map match-all test_cos
 match access-group name marca_cos_5
!
policy-map test
 class test_cos
  set cos 5

ip access-list extended marca_cos_5
 permit ip any 10.20.1.0 0.0.0.255

interface GigabitEthernet0/3.103024
 encapsulation dot1Q 1032 second-dot1q 4
 ip unnumbered Loopback3

 service-policy output test

 

And this is a part of a tcpdump with the policy enabled,

 ethertype 802.1Q (0x8100), length 106: vlan 1032, p 5, ethertype 802.1Q, vlan 4, p 0, ethertype IPv4,

 

I have the CoS in the outer VLAN but I don't have in the inner one.

 

Are there a way to set mark in the inner vlan?

Somebody has any idea?

 

Thanks in advance

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: