Upgrade dont work on SCE8000

[nmella]

Hi.

When we do the upgrade version of SCE8000 from version 3.5.5 to 3.6.5 the SCE8000 restart with version 3.5.5.
We did the upgrade by console CLI and SCA BB, without success.

Regards.

[Shelley Bhalla]

What were the steps taken to upgrade the SCE. This works flawlessly in my lab. There has to be a step missed somewhere.

Shelley.

[nmella]

SCE#>conf t

SCE(config)#>interface lin 0

SCE(config)#>pqi uninstall file  archive.pqi

SCE#>show pqi last-installed

1.- Upgrade SCOS 3.6.5 SCE.

SCE#>copy-passive ftp://username:password@IP_Addres_FTP_Server/scos-v365-b489-sce8000-k9.pkg  SCE8000_3.6.5.pkg

Botear con el nuevo OS.

SCE#>configure terminal

SCE(config)#> boot system /apps/data/scos/ SCE8000_3.6.5.pkg

SCE(config)#>exit

SCE#>copy running-config startup-config

SCE#>reload

2.       Install pqi file

SCE#>cd images

SCE#>copy-passive ftp://user:pass@ip_Adress/file.pqi

SCE#>configure

SCE(config)#>interface linecard 0

SCE(config-if)#>pqi install file  nombre_del_archivo.pqi

The problem is generated when the procedure applies and the SCE8000 restart with version 3.5.5.

Thanks.

Nelson.

[Shelley Bhalla]

Looks like a TAC case is open for this issue. I will work with the TAC engineer assigned to help you with this.

Shelley.