08-08-2017 12:19 PM - edited 07-05-2021 07:30 AM
Hi
we want to extend for a customer the corporate network to another building just on the opposit side of the road (50 meters distance). We are thiking about installing 2 1562i APs as Point to Point Bridge. Both APs can me mounted on the roof and have direct line of sight.
What datarate can i expect ? Does anybody have experience with this AP in Bridge mode ? As i said the distance is not very far.
Greetings
08-08-2017 01:25 PM
What datarate can i expect ? Does anybody have experience with this AP in Bridge mode ? As i said the distance is not very far.
Refer below datasheet
If you could use 80MHz channel bonding, then theoretical max value of 1.3Gbps across bridge. In practice you could get between 40-70% of that value.
If switch ports is 1 Gbps which effective capacity end to end (not 1.3Gbps
Refer below for reference wireless bridge config
https://mrncciew.com/2013/11/09/wireless-bridge-with-eap-fast/
HTH
Rasika
*** Pls rate all useful responses ***
08-08-2017 03:47 PM
Don't forget the 1562I requires 39.1 watts of power.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide