06-21-2013 03:04 AM - edited 07-04-2021 12:16 AM
Hi,
Does anybody know what is the maximum number of associated clients that supports a 1552I?
Has anybody tried with simultaneous streaming of multiple clients, how many will run?
Thanks
Solved! Go to Solution.
06-21-2013 04:21 AM
Well the limit is 200 and that's a configuration limit on the WLC code for AP's. Now how many on the mesh really depends on how many MAP's to RAP's you have as the backhaul is shared. For indoors it's typically 25 which is a good number and works well for outdoor, but I have had 100+ on a MAP at a high school sporting event and you really can't control that as your not going to deploy high density.
Sent from Cisco Technical Support iPhone App
06-21-2013 04:21 AM
Well the limit is 200 and that's a configuration limit on the WLC code for AP's. Now how many on the mesh really depends on how many MAP's to RAP's you have as the backhaul is shared. For indoors it's typically 25 which is a good number and works well for outdoor, but I have had 100+ on a MAP at a high school sporting event and you really can't control that as your not going to deploy high density.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide