Same VLAN in Multiples SSID

[Fulvio Ferreira]

Hello.

      Can I use the same VLAN in multiples SSID?

      Here is my config:

dot11 syslog

dot11 vlan-name Multi_TC_Legacy_1_VLAN_InsideFW vlan 400

dot11 vlan-name Multi_TC_RF_GMOL vlan 350

dot11 vlan-name Multi_TC_RF_VLAN_Management vlan 300

dot11 vlan-name Multi_TC_RF_VLAN_Radius vlan 301

!

dot11 ssid TOOLS

   vlan 400

   authentication open

   authentication key-management wpa

   wpa-psk ascii 7 107E080A1646405858

!

dot11 ssid sjcac-manuf-301

   vlan 301

   authentication open eap eap_methods

   authentication network-eap eap_methods

   authentication key-management wpa

!

dot11 ssid z06ctsv

   vlan 350

   authentication open eap eap_methods

   authentication network-eap eap_methods

   authentication key-management wpa

I would like to know if I can use VLAN 301 in SSID TOOLS and sjcac-manuf-301.

Thanks.

Fulvio Ferreira

[George Stefanick]

The autonmous mapping is 1-to-1. So no, its not supported.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

[George Stefanick]

if you have a wlc, you can do that .

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."