07-20-2017 05:12 AM - edited 07-05-2021 07:22 AM
Hi all,
we are running code 7.6 in foreign wlc (8510) and 7.4 in anchor wlc!
Thinking of upgrading the foreign wlc to v8.0.140 should i upgrade the anchor to the same version? what is the best practice?
Thanks for any inputs.
regards
Solved! Go to Solution.
07-20-2017 05:43 AM
No problem. You can have diff hardware and didd version both controllers.
Check table 19 and table 20 for matrix:
Regards
Dont forget to rate helpful posts
07-20-2017 05:16 AM
They don't need to be on the same code but if you can then I would recommend to keep on same version(but its not a must).
Here is a matrix that show the compatibility:
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-201251
Regards
Dont forget to rate helpful posts
07-20-2017 05:34 AM
Hi Sandeep,
Thanks.The anchor runs on 5508 platform! Will it make any difference?
There are plenty of matrix tables out in the document, which ones exactly references the EoIP tunnel compatibility for different versions.
please advise.
07-20-2017 05:43 AM
No problem. You can have diff hardware and didd version both controllers.
Check table 19 and table 20 for matrix:
Regards
Dont forget to rate helpful posts
07-20-2017 06:01 AM
thanks mate!
cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide