Hello alex,
Just checked the release notes for supported devices:Axis, its not listed in the supported devices, however you can try adding this in Generic Axis VAPIX version 3.0 or checked the axis if its supporte ONVIF 2.0 then you are good.
http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/release_notes/7_2_1/vsm_rn_7_2_1.html#wp54919
Table 5 Supported Devices: Axis
Model | Type | Minimum Supported FW Version | Video Format | Media Types | Audio | Dual Stream | Stream Mirroring | Motion Detection | Firmware Upgrade |
233D | IP Camera | 4.48.4 | NTSC / PAL | MPEG-4 MJPEG | Yes | Yes | Yes | Yes | Yes |
241Q | Encoder | 4.47.5 | NTSC PAL | MPEG-4, MJPEG | No | Yes | Yes | Yes | Yes |
241S | Encoder | 4.40 | NTSC PAL | MPEG-4, MJPEG | No | Yes | Yes | Yes | Yes |
243SA | Encoder | 4.45 | NTSC / PAL | MPEG-4 MJPEG | Yes | Yes | Yes | Yes | Yes |
243QBlade | Encoder | 4.46 | NTSC / PAL | MPEG-4 MJPEG | NA | Yes | Yes | Yes | Yes |
Q7401 | Encoder | 5.20.3 | NTSC / PAL | H.264 MJPEG | Yes | Yes | Yes | Yes | Yes |
Q7404 | Encoder | 5.20 | NTSC / PAL | H.264 MJPEG | Yes | Yes | Yes | Yes | Yes |
Q7406 | Encoder | 5.11.1 | NTSC / PAL | H.264 MJPEG | NA | Yes | Yes | Yes | Yes |
247S | Encoder | 4.42 | NTSC / PAL | MPEG-4 MJPEG | Yes | Yes | Yes | Yes | Yes |
P3301 | IP Camera | 5.40.92 | NTSC | H.264 MJPEG | Yes | Yes | Yes | Yes | Yes |
Br,
Nadeem
Please rate all useful post.
