7.2.1 with axis 211 cam

[alexdrozdpro]

Hello!

7.2.1 with the addition of the camera axis 211 produces an error that the resolution is not supported by the camera. 7.0.1 in the works.

[Nadeem Ahmed]

do you have other axis model are you getting this error with one only. please provide me the exact model of the camera.

Br,

nadeem

[alexdrozdpro]

camera AXIS 211 Network Camera, Firmware version: 4.40.2 

[Nadeem Ahmed]

Hello alex,

Just checked the release notes for supported devices:Axis, its not listed in the supported devices, however you can try adding this in Generic Axis VAPIX version 3.0 or checked the axis if its supporte ONVIF 2.0 then you are good.

http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/release_notes/7_2_1/vsm_rn_7_2_1.html#wp54919

Table 5 Supported Devices: Axis 

Model	Type	Minimum Supported FW Version	Video Format	Media Types	Audio	Dual Stream	Stream Mirroring	Motion Detection	Firmware Upgrade
233D	IP Camera	4.48.4	NTSC / PAL	MPEG-4 MJPEG	Yes	Yes	Yes	Yes	Yes
241Q	Encoder	4.47.5	NTSC PAL	MPEG-4, MJPEG	No	Yes	Yes	Yes	Yes
241S	Encoder	4.40	NTSC PAL	MPEG-4, MJPEG	No	Yes	Yes	Yes	Yes
243SA	Encoder	4.45	NTSC / PAL	MPEG-4 MJPEG	Yes	Yes	Yes	Yes	Yes
243QBlade	Encoder	4.46	NTSC / PAL	MPEG-4 MJPEG	NA	Yes	Yes	Yes	Yes
Q7401	Encoder	5.20.3	NTSC / PAL	H.264 MJPEG	Yes	Yes	Yes	Yes	Yes
Q7404	Encoder	5.20	NTSC / PAL	H.264 MJPEG	Yes	Yes	Yes	Yes	Yes
Q7406	Encoder	5.11.1	NTSC / PAL	H.264 MJPEG	NA	Yes	Yes	Yes	Yes
247S	Encoder	4.42	NTSC / PAL	MPEG-4 MJPEG	Yes	Yes	Yes	Yes	Yes
P3301	IP Camera	5.40.92	NTSC	H.264 MJPEG	Yes	Yes	Yes	Yes	Yes