03-08-2022 02:48 AM
Hi,
I want to connect a Cat 9200 switch-to-switch with an IE3200.
Both configure with macsec.But this constallation isn´t working
What I´m missing, is the command macsec network-link
on the IE-3200.
Can I connect these switches with macsec?
best regards
Uli
Solved! Go to Solution.
03-08-2022 04:36 AM
@ujaus that command doesnt seem to exist on the IE model of devices, here is the guide to configure https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie3X00/software/17_3/b_security_17-3_iot_switch_cg/m-macsec-protocol.html#id_117510
03-08-2022 06:16 AM
Thanks now it works
03-08-2022 04:36 AM
@ujaus that command doesnt seem to exist on the IE model of devices, here is the guide to configure https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie3X00/software/17_3/b_security_17-3_iot_switch_cg/m-macsec-protocol.html#id_117510
03-08-2022 06:16 AM
Thanks now it works
10-10-2023 06:21 AM - edited 10-11-2023 07:29 AM
On the IE-3x00 , at least the AB-Rockwell Stratix 5800 (IE-3300 rebranded), the command "macsec network-link" seems to be missing, meaning that MACSEC is only available Switch-to-Host, not Switch-to-Switch.
Someone check me?
This is Rockwell PN#: 1783-MMS10EAR (Stratix 5800)
Stratix5800(config-if)#macsec ?
replay-protection Configure replay protection parameters for MACsec operation
Stratix5800(config-if)#
(macsec network-link - MISSING)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide