09-08-2015 08:18 AM
I have 1 virtualized VSOM server and 3 media servers. Two of my media servers are older units that came with SLES 10 (32 bit) and VSM 6.3. All servers were running 7.6 fine since I upgraded them to 7.6 a few months ago. Unfortunately one of my media servers lost 2 hard drives at the same time and I lost everything on that box.
I replaced the two drives (I had purchased spare drives) and I ran the 6.3 install from ISO from Cisco. I am now needing to upgrade the box to 7.2.2 and then of course to 7.6. Unfortunately my smartnet ran out a month before the drives failed - naturally.
What I'm looking for, because I can't call Cisco is the step by step instructions on migrating from 6.3 to 7.2. I had Cisco do this for me a long time ago when I first migrated to 7.2. I know there were some CLI commands involved, copying the 7.2.2 setup files to the media server, etc.
Any help would be appreciated.
Solved! Go to Solution.
10-04-2015 09:33 AM
Check the attached document. It shows the steps to go from 6.3.x to 7.0.
09-15-2015 04:11 PM
I think the guides you need are located here:
09-16-2015 05:31 AM
Hey Emanuel, thank you for the response. However, if you look through those guides, it tells you you have to contact Cisco to get from version 6.3 to 7.2.
I was able to get an ATP vendor to assist me with this. Unfortunately I still do not know the process but I am upgraded and in production. But since I have two older media servers, it would be nice to know the steps to take in case I need to do this again in the future.
10-04-2015 09:33 AM
10-05-2015 07:31 AM
Thanks Emanuel, I appreciate it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide