Dear all,
i got a issue.
On the document CRS Upgrade procedure to 4.1.2 its says requirement is 2 Gig. But the software will consume about 1.2 Gig + 30% spare disk.
On our CRS we find out that we have 4Gig PCMCIA, and on the "configuring disk backup/mirroring on CRS", its default that disk above 3Gig will be splitted into 2 parts, 2Gig disk0: and 2Gig disk0a:
the question is :
1. is 4.1.2 is ok with only 2 Gig ?
Size(b) Free(b) Type Flags Prefixes
2102722560 818806784 flash-disk rw disk0:
2102788096 2102034432 flash-disk rw disk0a:
[K Active Packages:
disk0:hfr-mini-px-4.1.2
disk0:hfr-doc-px-4.1.2
disk0:hfr-cgn-px-4.1.2
disk0:hfr-mgbl-px-4.1.2
disk0:hfr-fpd-px-4.1.2
disk0:hfr-diags-px-4.1.2
disk0 has only free 810MB, mean while disk0a is almost free
2. how to destroy the partition, and use the full amount of PCMCIA disk ? is it recommended by cisco ?
Thanks,
Budi L
