12-21-2014 08:38 PM - edited 03-18-2019 03:49 AM
Just a heads-up warning to anyone considering upgrading to TC7.3.0 - the websnapshots now include a "privacy feature" where the snapshot of the camera(s) no longer displays on the web interface screen until you specifially click to activate the video source (see attached image). The websnapshot only shows around 5 seconds once clicked before requiring another activation. A large message also appears on the display of the endpoint stating that the video is being monitored by an administrator.
This warning message shrinks after a short period of time to just an icon, but the icon stays on the screen for approximately 10 minutes (even after disconnecting any browser session to the endpoint).
This is in addition to the previous issue where websnpshots were disabled while the unit was in standby (no-websnapshots-when-system-standby-tc71x).
Update: TC7.3.3 returned some of the functionality, and the removal of the large message, but you need to obtain a "Remote Monitoring" option key for each endpoint. However, this has introduced a range of other bugs which Cisco have not fully addressed yet.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Solved! Go to Solution.