I am using cisco 2911 router and system image file is c2900-universalk9-mz.SPA.154-1.T1.bin
I want to use ip sla monitoring to track the availability of my main gateway (default route to ISP1) and if it fails it will switch the default route to ISP2 .. the command is something like this:
ip sla 1
icmp-echo 8.8.8.8
timeout 250
threshold 250
frequency 1
however, the ip sla monitoring command seems not available on my 2911
Router01(config)#ip sla ?
key-chain Use MD5 Authentication for IP SLAs Control Messages
responder Enable IP SLAs Responder
server IPPM server configuration
I read somewhere else that I need to add an additional license in order to use that command... what additional license that I need?
this is the current license that I have
Technology Package License Information for Module:'c2900'
------------------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc None None None
data None None None
NtwkEss None None None
CollabPro None None None
thanks
