11-07-2014 05:44 AM - edited 07-05-2021 01:54 AM
Hello
I have a medium dense network consisting of around 120 3502i APs. The campus is in Europe and I've enabled DFS channels. This is running fairly well, but I do have quite a lot of channel changes (around 50-100 a day) because of Radar events. The Wi-Fi has enabled all channels and I use 40 MHz. I made now a small statistic and discovered that I have a lot of events on the channels: 52,60,64,100,104,108,112,132 and 136.
I have thought now to remove those channels from RRM-DCA, which should keep my controllers from assigning them to the APs? Side question, is it possible that this can't be configured with a controller template in Prime Infrastructure 2.1?
If I disable those channels, how many 40 MHz channels will I have left? I my calculation is not completely off, I'm left with a low 4 non-overlapping channels?
As source I used this http://www.wirevolution.com/2012/06/24/802-11ac-and-802-11ad-why-both/ and this http://electronicdesign.com/communications/understanding-ieee-80211ac-vht-wireless
Thanks for confirming my thoughts.