Team iam getting this error message,Its brand new box and we are testing it in our lab.
%IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/1/0, link down due to local fault
complete log message
Oct 22 05:52:19.170: %SONET-4-ALARM: TenGigabitEthernet0/1/0: WLOS declared
*Oct 22 05:52:19.181: %SONET-4-ALARM: TenGigabitEthernet0/1/0: WLOS cleared
*Oct 22 05:52:19.181: %SONET-4-ALARM: TenGigabitEthernet0/1/0: SLOF declared
*Oct 22 05:52:19.340: %SPA_OIR-6-ONLINECARD: SPA (SPA-1X10GE-WL-V2) online in subslot 0/1
*Oct 22 05:52:19.345: %SONET-4-ALARM: TenGigabitEthernet0/1/0: B2 declared
*Oct 22 05:52:19.345: %SONET-4-ALARM: TenGigabitEthernet0/1/0: WLOS declared
*Oct 22 05:52:19.378: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/1/0, link down due to local fault
*Oct 22 05:52:20.208: %SONET-4-ALARM: TenGigabitEthernet0/1/0: WLOS cleared
*Oct 22 05:52:20.208: %SONET-4-ALARM: TenGigabitEthernet0/1/0: SLOF declared
*Oct 22 05:52:21.042: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/1, changed state to up
*Oct 22 05:52:21.161: %LINK-3-UPDOWN: Interface TenGigabitEthernet0/1/0, changed state to down
*Oct 22 05:52:22.092: %IOSXE_SPA-6-UPDOWN: Interface TenGigabitEthernet0/1/0, link down due to local fault
*Oct 22 05:52:21.376: %LINK-3-UPDOWN: SIP0/1: Interface TenGigabitEthernet0/1/0, changed state to down
sh int te0/1/0
TenGigabitEthernet0/1/0 is down, line protocol is down
Hardware is SPA-1X10GE-WL-V2, address is f07f.06da.4c10 (bia f07f.06da.4c10)
MTU 1500 bytes, BW 9953280 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not supported
Full Duplex, 10000Mbps, link type is force-up, media type is 10GBase-SR/SW
output flow-control is on, input flow-control is on
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
the other end of the connection is sfp-10g-sr
ASR IMAGE
ASR1002-X#sh ver
Cisco IOS XE Software, Version 03.13.00.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(3)S, RELEASE SOFTWARE (fc11)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Mon 28-Jul-14 01:21 by mcpre
