03-16-2015 10:39 AM - edited 03-01-2019 12:04 PM
Hello all,
I have done an upgrade of the UCS system. I moved from 2.0 to the lastest new one. While performing the upgrade everything seemed ok, but after the whole process was finished, both FI 6248UP will not come up. LEDs seems to be ok, but neither the console port is responding nor the UCS Manager IP address. Although I've changed the CONSOLE PORT settings, it will not respond. I connected it to see while the FI was booting and not output received.
Is there any way to reset o check what is happening?
Thanks in advance,
Fernando
Solved! Go to Solution.