After erase configuration from FI 6248 console and setup again...
I failed to enter the subnet mask... Any idea what went wrong??
Enter the configuration method. (console/gui) ? console
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Enter the setup mode; setup newly or restore from backup. (setup/restore) ? setup
You have chosen to setup a new Fabric interconnect. Continue? (y/n): y
Enforce strong password? (y/n) [y]: n
Enter the password for "admin":
Confirm the password for "admin":
Is this Fabric interconnect part of a cluster(select 'no' for standalone)? (yes/no) [n]:
Enter the system name: FI
Physical Switch Mgmt0 IP address : 192.168.0.1
Physical Switch Mgmt0 IPv4 netmask : 255.255.255.0
Invalid subnet mask.Physical Switch Mgmt0 IPv4 netmask : Invalid IPv4 form. Should be of form 'X.X.X.X', where each
letter corresponds to a decimal number between 0 and 255.
Physical Switch Mgmt0 IPv4 netmask :
Physical Switch Mgmt0 IPv4 netmask : 255.0.0.0
Invalid subnet mask.Physical Switch Mgmt0 IPv4 netmask : Invalid IPv4 form. Should be of form 'X.X.X.X', where each
letter corresponds to a decimal number between 0 and 255.
Physical Switch Mgmt0 IPv4 netmask : 255.255.255.0
Invalid subnet mask.Physical Switch Mgmt0 IPv4 netmask : Invalid IPv4 form. Should be of form 'X.X.X.X', where each
letter corresponds to a decimal number between 0 and 255.
Physical Switch Mgmt0 IPv4 netmask :
Physical Switch Mgmt0 IPv4 netmask : 255.255.0.0
Invalid subnet mask.Physical Switch Mgmt0 IPv4 netmask : Invalid IPv4 form. Should be of form 'X.X.X.X', where each
letter corresponds to a decimal number between 0 and 255.
