Dear All,
Hope all doing well....
Below is the error i encountered during installation:
While Installting and configuring UCS C220 M3s server & initially the card is with UCSC-RAID-MZ card which supports RAID 0/1/10.
Now i replaced it with UCSC-RAID-11-C220 mezzanine card so that it supports RAID 0/1/5/10/50.
But when i opened the CIMC of the server & again it is showing that it supports only RAID 0/1/10...
Kindly find the attachments for your reference.
Do i need to enable or configuring any additional options on the BIOS of the server to support RAID 5 ?
Looking forward to hear from you !!! Thanks in advance..
Regards,
Gopi G
