Hi Techs,
Could you please help with the SNMP V3 configuration on ISR4321 for Entuity NMS tool. The ISR is discoverable via SNMP V1 or V2c. I have below commands on the router and the device is getting certified but there are no interfaces or data present.
snmp-server group group1 v3 auth read V3Read write V3Write
snmp-server user user1 group1 v3 auth md5 user1pass
snmp-server view V3Read iso included
snmp-server view V3Write iso included
snmp-server host 1.1.1.1 version 3 auth user1
snmp-server enable traps
There are some posts asking to add SNMP local/remote Engine ID with port. Is it required ? Also the udp port required is usual 161/162 ?
Regards,
Santosh
