I'm a novice so will do my best to relay this issue. I'm am trying to move firmware found in my root directory "c://TFTP" that contains all files I need to upgrade my IP phone. However when I boot the phone up, I am not able to manually enter anything as settings etc are unavailable. No matter what I try I'm not able to open the settings menu. While the phone is booting it goes throught this process shown on the phone dispaly(Configuring VLan> Configuring IP> Requesting Configuration> TFTP timeout o/a) While in TFTPd32 I'm seeing
(
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0F:8F:FB:AA:0E [22/02 03:57:08.038]
DHCP: proposed address 192.168.0.100 [22/02 03:57:08.539]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:0F:8F:FB:AA:0E [22/02 03:57:08.562]
Previously allocated address 192.168.0.100 acked [22/02 03:57:08.563]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0F:8F:FB:AA:0E [22/02 04:06:20.849]
DHCP: proposed address 192.168.0.100 [22/02 04:06:21.351]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:0F:8F:FB:AA:0E [22/02 04:06:21.374]
Previously allocated address 192.168.0.100 acked [22/02 04:06:21.375]
)
You have no idea how in over my head I am but at the end I'll have found a million ways how not to successfully add firmware to a cisco phone. Can anyone please provide any help to this issue? Also
here are my settins. used a static ip i set up for the def.router (opt 3) field the other options are pretty standard defaults. THANK YOU SO MUCH to anyone that may provide a solution
