10-03-2018 07:16 AM - edited 03-08-2019 04:18 PM
Hello,
Today we had a syslog message from a Catalyst 3850 switch with IOS 03.06.08E
3-10-2018 15:38:24 |
Notice |
ILPOWER-5-MOSFET_FAULT |
41502: Interface Gi1/0/30: Mosfet fault |
c3850-S1-109-12#show ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.06.08E RELEASE SOFTWARE (fc1)
I found in the buglist that in the Denali the problem is solved and was detect on a Fuji and the Everest versions,
but not for the 03.06.08E version. In the 03.06.09E version it's not resolved and even it's not in the Open Caveats.
Solved! Go to Solution.