Hello,
I'm actually from the Collaboration site. Now I have to install two new C220M5SX without VMWare. First I installed the latest BIOS version 4.0.4c via Host Upgrade utility. Here all the NIC drivers were updated. After that I took the current custom VMWare from Cisco Mware_ESXi_6.5.0_10719125_Custom_Cisco_6.5.2.3.iso.
Unfortunately VMWare does not recognize the X550T2 on 2 machines.
According to the UCS Hardware and Software Compatibility page all drivers are correct.
The BIOS recognizes the X550T2, also shows me that a Cabel is connected here. But under VMWare I cannot use the ports. With the command esxcfg-nics -l there are no VMNIC0 and 1. I think the second command is more hardware related, and here we see the vmnic0 and 1.
VMWare have the correct drivers.
Any suggestion how to fix the problem?
Best regards
Jörg
