Hi all,
I upgraded NCS5501-SE from 6.6.3 to 7.1.2, upgrade went smooth, but after upgrading fpd, i this message telling to reload.
RP/0/RP0/CPU0:RT#sh hw-module fpd
Tue Dec 14 14:15:22.672 UTC
FPD Versions
=================
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------
0/RP0 NCS-5501-SE 1.1 MB-MIFPGA CURRENT 1.02 1.02
0/RP0 NCS-5501-SE 1.1 Bootloader RLOAD REQ 1.15 1.22
0/RP0 NCS-5501-SE 1.1 CPU-IOFPGA UPGD FAIL 1.14 1.14
0/RP0 NCS-5501-SE 1.1 MB-IOFPGA CURRENT 1.11 1.11
RP/0/RP0/CPU0:RT#
after the reload, i cannot access CLI and the router reboot continuously.
How to fix it ? Thanks
