Hi,
I have two HA C9800L-C controllers, one in LAN, one in DMZ.
I have 9105 Teleworker AP used at remote employee house tunneling back to DMZ (using this guide: https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/9800/17-3/deployment-guide/remote-workforce-solution-wireless.pdf).
The 9105 terminates at the DMZ C9800. I want to get the 9105 traffic to terminate at the LAN, but it must go through DMZ controller first..
Could I setup Mobility Anchor solution to do this?
